Lanner FW-7551SE, User Manual

Page: 34 / 59

FW-7551SE User Manual
34
When you are installing a motherboard or when the system prompts “ Run Setup ” during start-up, you will
use the BIOS Setup program to configure the system. This section explains how to configure your system
using this program.
Even if you are not prompted to enter the BIOS Setup program when you are installing a motherboard, you
can still change the configuration of your computer later on with this program. For example, you may want
to enable the security password feature or change the power management settings. This requires you to
reconfigure your system by using the BIOS Setup program so that the computer can recognize these
changes and record them in the CMOS RAM.
When you start up the computer, the system provides you with the opportunity to run this program. Press
<Delete> during the Power-On-Self-Test (POST) to enter the Setup utility (There are a few cases that other
keys may be used, such as <F1> , <F2> , and so forth.); otherwise, POST continues with its test routines.
If you wish to enter Setup after POST, restart the system by pressing <Ctrl+Alt+Delete> , or by pressing
the reset button on the system chassis. You can also restart by turning the system off and then back on. Do
this last option only if the first two failed.
The Setup program is designed to make it as easy to use as possible. Being a menu-driven program, it lets
you scroll through the various sub-menus and make your selections from the available options using the
navigation keys.
Note: This manual describes the standard look of setup screen. There may be some instances
where the motherboard features vary from one to another due to customization. This means some
of the options described in this manual may not match that of your motherboard’s AMI BIOS.