Lanner ECA-5540, User Manual, Page: 32 / 110

ECA-5540 User Manual
32
Installing GPU Graphic Card (Optional)
The ECA-5540 is equipped with a PCIe x16 FH/FL slot, suitable for GPU graphics or acceleration card
expansion. Please proceed with the following steps for installation.
1. Power off the system and open the chassis cover.
2. Unscrew the two (2) screws on left side of the bracket, and one (1) screw on the right side.
3. Pick up the PCIe bracket, align the GPU
module to the PCIe bracket. Slide the GPU
module into the PCIe bracket until it is fully
seated.
4. Install the bracket back onto the motherboard. Secure with the three (3) original screws.