AMI BIOS SETUP
~ 45 ~
AMIBIOS HIFLEX SETUP UTILITY - VERSION 1.38
© 2001 American Megatrends, Inc. All Rights Reserved
MB-X66 Ver.A 2003-01-08
Standard CMOS Setup
Advanced CMOS Setup
Advanced Chipset Setup
Power Management Setup
PCI / Plug and Play Setup
Peripheral Setup
Hardware Monitor Setup
Change Supervisor Password
Auto Configuration with Optimal Settings
Save Settings and Exit
Exit Without Saving
Change the user password
ESC : Exit
↑↓
: Sel F2/F3 : Color F10 : Save & Exit
Type the password, up to six characters in length, and press<Enter>. The password typed
now will replace any previously set password from CMOS memory. You will be prompted
to confirm the password. Retype the password and press<Enter>. You may also
press<Esc> to abort the selection and not enter a password.
To clear a set password, just press<Enter> when you are prompted to enter the password.
A message will show up confirming the password will be disabled. Once the password is
disabled, the system will boot and you can enter Setup without entering any password.
When a password has been set, you will be prompted to enter it every time you try to
enter Setup. This prevents an unauthorized person from changing any part of your system
configuration.
Additionally, when a password is enabled, you can also have AMIBIOS to request a
password each time the system is booted. This would prevent unauthorized use of your
computer. The setting to determine when the password prompt is required is the
PASSWORD CHECK option of the ADVANCED BIOS FEATURES menu. If the
PASSWORD CHECK option is set to Always, the password is required both at boot and at
entry to Setup. If set to Setup, password prompt only occurs when you try to enter Setup.
Note: About Supervisor Password & User Password
Supervisor Password : Can enter and change the settings of the setup menu.
Enter corrent supervisor password:
Summary of Contents for MB-X66 Series
Page 44: ...AMI BIOS SETUP 40...
