36
IRQ Resources :
When resources are controlled manually, assign each system interrupt as one of
the following types, depending on the type of device using the interrupt.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
IRQ Resources
Item Help
Menu Level
IRQ3 assigned to
IRQ4 assigned to
IRQ5 assigned to
IRQ6 assigned to
IRQ7 assigned to
IRQ8 assigned to
IRQ9 assigned to
IRQ10 assigned to
IRQ11 assigned to
IRQ12 assigned to
IRQ13 assigned to
IRQ14 assigned to
IRQ15 assigned to
Legacy ISA
Legacy ISA
PCI/ISA PnP
Legacy ISA
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
Legacy ISA for devices
compliant with the original
PC AT bus specification ,
PCI/ISA PnP for devices
compliant with the Plug and
Play standard whether
designed for PCI or ISA bus
architecture.
á
â
àß
Move
Enter: /-/PU/PD: Value F10: Save Esc: Exit F1: General
Help
F5: Previous Values F6: Fail-Safe DefaultsF7: Optimized Defaults
DMA Resources :
The sub menu can let you control the DMA resource.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
DMA Resources
Item Help
Menu Level
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
PCI/ISA PnP
Legacy ISA for devices
compliant with the original
PC AT bus specification ,
PCI/ISA PnP for devices
compliant with the Plug and
Play standard whether
designed for PCI or ISA bus
architecture.
á
â
àß
Move
Enter: /-/PU/PD: Value F10: Save Esc: Exit F1: General
Help
F5: Previous Values F6: Fail-Safe DefaultsF7: Optimized Defaults
PCI/VGA Palette Snoop :
Leave this field at “Disabled”. The settings are “Enabled”, “Disabled”.
Assign IRQ for VGA :
Enable/Disable to assign IRQ for VGA. The settings are “Enabled”,
“Disabled”.
Assign IRQ for USB :
Enable/Disable to assign IRQ for VGA. The settings are “Enabled”,
“Disabled”.
INT Pin 1 Assignment:
This item always you to set INT pin 1 function. The default setting is “Auto”.
INT Pin 2 Assignment:
This item always you to set INT pin 2 function. The default setting is “Auto”.
INT Pin 3 Assignment:
This item always you to set INT pin 3 function. The default setting is “Auto”.
Summary of Contents for MB-X63 Series
Page 4: ......
Page 7: ...3 1 5 Board Layout...
