Lanner electronics MB-X63 Series, User Manual

Page: 36 / 47

32
3.7 P
OWER
M
ANAGEMENT
S
ETUP
The “Power Management Setup” controls the CPU card‘s “Green” features. When you select the
“POWER MANAGEMENT SETUP” on the main program, the screen display will appears as:
Power Management Setup Screen
CMOS Setup Utility – Copyright © 1984-2001 Award Software
Power Management Setup
ACPI function Enabled Item Help
Power Management Press Enter Menu Level
ACPI Suspend Type S1 (POS)
PM Control by APM Yes
Video Off Option Suspend -> Off
Video Off Method V/H SYNC + Blank
MODEM Use IRQ 3
Soft-Off by PWRBTN Instant – off
Wake Up Events Press Enter
á â àß
Move Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Function : This item allows you to enable or disable the Advanced Configuration and Power
Management (ACPI). The settings are “Enabled” and “Disabled”.
Power Management :
Power Management User Define Item Help
HDD Power Down Disable
Menu Level
Doze Mode Disable
Suspend Mode Disable
á â àß
Move Enter: /-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
This category allows you to select the type (or degree) of power saving and is directly related to the
following modes:
1. HDD Power Down
2. Doze Mode
3. Suspend Mode
There are four selections for Power Management, three of which have fixed mode setting.
Disable (Default)
No power management. Disables all four modes.
Min. Power Saving Minimum power management. Doze Mode=1hr. Standby Mode =1hr.,
Suspend Mode=1hr., and HDD Power Down=15min.
Max. Power Saving Maximum power management. –Only available for SL CPU’s. Doze
Mode=1min., Standby Mode=1min., Suspend Mode=1min., and HDD Power
Down=1min.
User Defined Allows you to set each mode individually. When not disabled, each of the
ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges
from 1 min. to 15 min. and disabled.
ACPI Suspend Type : This item will set which ACPI suspend type will be used.
S1 (POS) The S1 sleeping state is low wake-up latency sleeping state. In this state, no
system context is lost (CPU or chipset) and hardware maintains all system
context.
S2 (STR) The S2 sleeping state is STR sleeping state.