Chapter 3 BIOS Setup
43
User’s Manual
3.6 Integrated Peripherals
When you select the “INTEGRATED PERIPHERIALS” on the main program, the screen display will appears
as:
Integrated Peripherals Setup Screen
Phoenix – Award BIOS CMOS Setup Utility
Integrated Peripherals
Item Help
Menu Level
!
X
X
X
X
X
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
USB Controller
USB Keyboard Support
AC97 Audio
Init Display First
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
IR Function Duplex
TX, RX inverting enable
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Parallel Port EPP Type
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
Onboard Legacy Audio
Sound Blaster
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Auto]
[Add-On Card]
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Standard]
Half
No, Yes
[378/IRQ7]
[Normal]
3
Epp1.9
[3E8H]
[IRQ4]
[2E8H]
[IRQ3]
[Enabled]
[Enabled]
#
$
%
Move Enter: /-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
On-Chip Primary PCI IDE: The chipset contains a PCI IDE interface with support for two IDE channels.
Select Enabled to activate the primary IDE interface. Select Disabled to deactivate this interface. The
settings are “Enabled” and “Disabled”.
On-Chip Secondary PCI IDE:
The chipset contains a PCI IDE interface with support for two IDE
channels. Select Enabled to activate the secondary IDE interface. Select Disabled to deactivate this
interface. The settings are “Enabled” and “Disabled”.
USB Controller: Select Enabled if your system contains a Universal Serial Bus (USB) controller and you
have USB peripherals
USB Keyboard Support: Set this option to “Enabled” or “Disabled” the USB keyboard/ mouse support.
The default setting is “Disabled”.
AC97 Audio: This option sets the AC97 Audio.
"
#
Summary of Contents for EM-660 Series
Page 4: ......
Page 7: ...Chapter 1 Introduction 3 User s Manual 1 5 Board Layout...
