Master-Slave mode:
In master/slave mode you can link up to 31 lasers to the
laser in master mode. The laser in master mode controls
the other up to 31 lasers in slave mode, you always need to
have 1 laser in master mode and all linked lasers in slave
mode ( see pic 4 and 5 ).
Dipswitch settings master:
F= FUNCTION ON O= OFF [ PIC. 4 ]
Dipswitch
Function/Mode
1 2 3 4 5 6 7 8 9 10
x x x x x x x x F F Sound/Auto Mode
O
O
O
O
O
O
O
O
x x Dmx, Master/Slave
Music mode: switch 9 off, switch 10 on.
Auto mode: switch 9 on, switch 10 on.
Dipswitch settings slave:
F= FUNCTION ON O= OFF [ PIC. 5 ]
Dipswitch
Function/Mode
1 2 3 4 5 6 7 8 9 10
x x x x x x x x x x Sound/Auto Mode
O
O
O
O
O
O
O
O
O
O
Dmx, Master/Slave
Its not possible to use a dmx controller if function is set in
music or auto mode.
Pag. 9
4-Tunnellaser Serie Troubleshooting
1.
laser does not work via dmx:
check if the dipswitch settings are in the correct position
2.
laser does not work in Music mode (no indication light):
A: there is no Music or its to soft.
B: the sensitivity knob is off, turn it to the right to
increase sensitivity.
3.
in master-slave mode the slave laser( s ) do not work:
A: check the dipswitch settings for master and slave.
B: check if the dmx-controller is disconnected.
With any other problems you may contact your dealer,
the company you bought the laser or our company for
service.
Pag. 10
