Lanier 5515, Operator'S Manual

Page: 51 / 97

System Settings
User Tools Settings 5 - 3
System Settings
Menu Description
1. Function Priority You can specify the mode to be displayed immediately
after the operation switch is turned on or System Reset
mode is turned on.
Default: Copier
2. Copy Count Display) The copy counter can be set to show the number of copies
made (count up) or the number of copies remaining to be
made (count down).
Default: Up (count up)
3. System Reset The machine returns to its prioritized mode automatically
after your job is finished, after the selected time. This
function is called “System Reset”. The time can be set
from 10 to 999 seconds, or no system reset.
You can specify the prioritized mode with the user tools.
Default: On (60 seconds)
4. Energy Saver Timer The machine enters Low Power mode automatically after
your job is finished, after the selected time. The time can
be set from 1 to 240 minutes.
In Low Power mode, power consumption is reduced by
30% compared with Standby mode. This value applies to
5515 Copier features only.
Default:15 minutes
5. Energy Saver Level You can select the Energy Saver level.
Level 1
• Power Consumption:
Reduced by about 40% compared standby mode.
• Warm-Up Time:
about 15 seconds
Level 2
• Power Consumption:
Reduced by about 60% compared standby mode.
• Warm-Up Time
less than 30 seconds
Default: Level 1