Lanier 5515, Operator'S Manual

Page: 26 / 97

Using Auto Start
3 - 4 Copier Functions
Using Auto Start
1
Place the original document in the Document
Feeder or on the Exposure Glass.
2
Make your copy requirement selections.
3
Press the Start key. The indicator light in the
Start key turns red.
4
The copier automatically begins copying
when the copier comes to its Ready
condition.
When the copier comes to its Ready
condition, the indicator light in the Start key
turns green.
Note: To cancel Auto Start, press the
Clear/Stop key.
When the copier is first turned ON, it takes only 25 seconds for it to warm-up and come to its
Ready condition. During this time, you can set up your copy job, press the Start key and walk
away. You can even do this while your copier is in the Energy Saver mode. When the copier
comes to its Ready condition, it automatically copies your job.