Page 20 / 23
5.1 Port Control
Command group to which the communication port control
- Open: Open the communication port
- Close: Close the communication port
- Message Box: Show the port number that is currently being used
5.2 Target Product
Choose the affected product among products group
Change the range of step motor as select
5.3 LD Command
Command group to which the output power of laser diode control
- LD Off: Off the power of laser diode. Shut off automatically if the set power is 0%
- LD On: On the power of laser diode. Shut on automatically if the set power is over 1%
- LD Max: Set the maximum output power of laser diode
- Dec 1: Decrease 1% of current output power
- Inc 1: Increase 1% of current output power
- Power(X): Control any power.
The output power can be set if user input the value in the box of Power(%) or use slider control bar.
