Lang The Well C010, User Manual

Page: 35 / 50

35
ENG
5.4 HOT CLEANING
5.5 CHANGING THE FILTERS
5.6 DESCALING
Hot Cleaning is an automated process that uses the built-in boiler to create hot water to clean and sanitize the components inside the appliance.
The Hot Cleaning Procedure, which takes about 5 minutes, is initiated automatically every two days. The automatic interval can be changed, and
hot cleaning can also be started manually from the “Maintenance” menu. This ensures that you always get clean and healthy water, no matter how
much time has passed since you last used the machine.
The Hot Cleaning Procedure is described in detail in Section 2.9 of Setup.
The filters must be replaced every two years. The machine will display a warning message when they are due for replacement, so you can order
and insert new ones.
When new filters are inserted in the appliance, they need to be filled and rinsed before they can be used to process water. The procedure is au-
tomated, but it takes about 25 minutes, and it requires that the user be available to fill the Tap Water Jar with clean water and empty the Clean
Water Jar when it is full.
The Setting Up Filters Procedure is described in detail in Section 2.8 of Setup.
Depending on the hardness of your tap water, calcium deposits may form inside the appliance. Over time, these calcium deposits may reduce the
performance of the machine and the filters and potentially reduce their lifespan. If you notice that the machine is operating more slowly, calcium
deposits may already have formed inside. To remove the calcium deposits, the machine has an automated Descaling Procedure, which requires the
two Special Descaling Cartridges (SDC) included with TheWell, as well as 50 grams of citric acid.