background image

Maintenance 

Cleaning 

WARNING 

UNPLUG THE PROOFER BEFORE CLEANING 

 
 
To provide the proper atmosphere for proofing or holding Lang has designed a sealed cabinet.  A 
characteristic of the unit is an accumulation of water on the bottom of the cabinet.  This 
accumulation should be removed daily.  This is easily accomplished.  Simply remove the pan slides 
from each side and lift out the floor.  Sponge out any excess accumulation of water. 
 
Many water supplies are laden with minerals.  Over time, the minerals build up on the pan.  Use 
soap and water to clean the pan.  To remove any heavy mineral built up, soak the pan in a vinegar 
and water solution. 
 
The body of your Lang Proofer/Holding cabinet is constructed entirely of stainless steel.  Very little 
maintenance is required.  Periodically clean the unit with a hot soap and water solution or 
commercial stainless steel cleaner. Wipe the interior of the proofer with a mild soap and water 
solution and rinse with clear water 
 
The doorframe is anodized aluminum.  When cleaning make certain the solution is not caustic and 
states “safe on Aluminum.”  A hot soap and water solution is all that is necessary to clean the door 
and window.  Do not use a window cleaner which contains ammonia.  Very small amounts of 
ammonia will damage the magnetic door seal and require it be replaced. 
 
 

Calibration 

Calibration of your Lang Proofer/Holding Cabinet will never be necessary.  Unlike conventional 
thermostats, that change over time, your Lang Proofer/Holding cabinet never needs calibration 
because it is solid state controlled. 
 
 
 
 

Summary of Contents for PFL 120













Reviews: