background image

4

ELECTRICAL CONNECTION

WARNING

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS EQUIPPED WITH A 3-PRONG (GROUNDING) PLUG FOR YOUR PROTECTION AGAINST SHOCK

HAZARD AND MUST BE PLUGGED DIRECTLY INTO A PROPERLY GROUNDED 3-PRONG RECEPTACLE.

DO NOT CUT OR REMOVE THIS GROUNDING PRONG FROM THE PLUG.

120 Volt Models:

The electrical connection must be made in accordance with local codes or in the absence of local codes with
NFPA No. 70 latest edition (in Canada use: CAS STD. C22.1).
The electrical service entrance is provided by a cord and plug.
Each appliance requires a 120 volt grounded supply and 16.7 amps.
Supply wire size must be 14 gauge or larger to carry the load for one proofer.
The plug type is NEMA S-20P, match the plug to the corresponding NEMA S-20R for the receptacle
(receptacle not supplied).

240 Volt Models:

The electrical connection must be made in accordance with local codes or in the absence of local codes with
NFPA No. 70 latest edition (in Canada use: CAS STD. C22.1).
The electrical service entrance is provided by a cord and plug.
Each appliance requires a 240/208 volt grounded supply and 16.7 amps.
Supply wire size must be 14 gauge or larger to carry the load for one proofer.
The plug type is NEMA #6-15P, match the plug to the corresponding NEMA #6-15R for the receptacle
(receptacle not supplied).

VOLTAGE

AMPERAGE

WATTAGE

120

13.0

1550

240

6.5

1550

Summary of Contents for PF-H-1












Reviews: