![background image](http://html1.mh-extra.com/html/lang/peq-2/peq-2_manual_3553320013.webp)
TROUBLE SHOOTING
PROBLEMS
SOLUTIONS
Applying Cut and Boost to the frequencies doesn´t have
any affect on the signal.
Make sure the LANG PEQ-2 isn´t in OUT mode.
The frequency range covered by the HF Boost is too
small.
Use the Bandwidth knob to adjust the bell curve of the
Peak.
The frequency range covered by the HF Boost is too wide. Once again, use the Bandwidth knob to control exactly
how wide or narrow that adjustment needs to be.
When I activate the equalizer there is just too much of a
drop in the signal´s volume.
Becareful, you are most likely applying to much
attenuation to your processed signal.
The LANG PEQ-2 just makes every track sound too good.
Remember you are lucky enough to be working with a
piece of history. Enjoy it!
The sound is altogether to strident and screechy.
Apply a bit of HF Droop at 10, 15 or 20 kHz to soften it up.
There are too many sub sonic frequencies going on.
Use some LF Droop to cut at 20 or 50 Hz to clear things
up a bit.
13
* For any further doubts or questions please get in contact with us at: