Quick start guide onyxTOUCH
version 1.0
LANG AG
01.01.2016
Page 4 of 6
2.4 Installation on Windows
onyxTOUCH supports Windows since Windows 7.
If you are using a Windows system there is no driver installation necessary, the onyxTOUCH
will be recognised as a HID device. Just connect the mains adapter and USB cable like
described above and the device will be shown in the device manager after a few seconds.
If it is not shown and the touch function doesn’t work, please make sure that everything is
connected
correctly.
Furthermore
you
can
contact
the
support
directly:
3. Calibration
Generally there is no calibration necessary. If you need to calibrate the onyxTOUCH you
have to use a Windows system. Please go to the Windows calibration function under Tablet
PC Settings (
Before calibrating - make sure your display is set to its native resolution - otherwise problems
might occur on the display side causing the offset error.
Please Note that Windows 8 has a tool built-in. S
earch for “calibrate” in Windows and it will
show up.
Figure 1 Tablet PC Settings
