6
UNPACKING
3.1 Receiving the Cheese-melter
Upon receipt, check for freight damage, both visible and concealed. Visible
damage should be noted on the freight bill at the time of delivery and signed by the
carrier's agent. Concealed loss or damage means loss or damage which does not
become apparent until the merchandise has been unpacked. If concealed loss or
damage is discovered upon unpacking, make a written request for inspection by the
carrier's agent within 15 days of delivery. All packing material should be kept for
inspection. Do not return damaged merchandise to Lang Manufacturing Company.
File your claim with the carrier.
3.2 Location
Prior to un-crating, move the cheese-melter as near its intended location as
practical. The crating will help protect the unit from the physical damage normally
associated with moving it through hallways and doorways.
3.3 Un-crating
The cheese-melter will arrive completely assembled inside a wood frame covered
by cardboard box and strapped to a skid.
Remove the cardboard cover, cut the
straps and remove the wood frame.
The unit back is not attached to the machine. It is packaged loose behind the
Cheese-melter.
The screws used to attach the back to the cheese-melter are screwed into the rear
edge of the machine.
CAUTION:
CHEESE-MELTER WEIGHS 135 lbs (61.24 kg). FOR
SAFE HANDLING, INSTALLER SHOULD OBTAIN HELP
AS NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.
CAUTION:
ANY STAND, COUNTER OR OTHER DEVICE ON WHICH
CHEESE-MELTER WILL BE LOCATED MUST BE
DESIGNED TO SUPPORT THE WEIGHT OF THE UNIT.
CAUTION:
SHIPPING STRAPS ARE UNDER TENSION AND CAN
SNAP BACK WHEN CUT.
Remove cheese-melter from skid and place in intended location.
