7
Chap
ter 4
Chap
ter 5
4 Servicing
4.1 Malfunctions/Errors
Caution! The component and clamping device can become magnetized.
The inserted magnets, as well as the part, can become magnetized as a result
of using the Makro•Grip
®
5-Axis Vise several times. Particles from milling can
remain stuck on the device. Regular cleaning of the elements is necessary to
ensure a perfect fit without interference. The magnets can be removed as
necessary for cleaning.
5 Warnings
5.1 Intended Use
The operating company is responsible for using the product as intended, with caution and
under the appropriate conditions. In the event of improper use, no liability shall be assumed
by the manufacturer, nor shall any refund be provided.
5.2 Personnel Requirements
Operating company responsibilities:
Only trained personnel with the relevant background knowledge (specializing in
metal), e.g. CNC operators, are authorized to work with the product.
Personnel responsibilities with regard to installation, commissioning, operation,
maintenance and repair must be clearly defined.
Trainees may work with the product only when supervised by an experienced
professional (specializing in metal) or by a CNC operator.
5.3 Personal Protective Equipment and Safety of Personnel
Personal protective equipment (work clothes and non-slip safety footwear, gloves,
hair net, etc.) must be worn as specified in the guidelines and regulations of the em-
ployer’s liability association and the operating company. Obtain information from your
employer’s safety officer.
