6
3. Before placing the milling contour, a precision block must be clamped between the
contour jaws. This block is tightened with the torque defined and specified for the
future part. Thus the conditions created are the same as those created when
manufacturing the component to be machined.
If there is no precision block, the jaws are clamped against each other. To do this,
the milling contour must be adjusted accordingly.
LANG TECHNIK SAFETY INFORMATION
The minimum clamping depth (E) is limited to 3 mm. In this regard,
applying force above the 3 mm clamping depth is not permitted.
4. The final step is to place the desired workpiece contour into the top jaws. To avoid
future confusion, we recommend engraving/labeling the jaws “left” and ”right” or
with the serial number of the clamping device.
Milled contour
3 Design and Function
Chap
ter 3
With precision block
No precision block
