![background image](http://html1.mh-extra.com/html/lang/lro-1e/lro-1e_installation-operation-maintenance-and-troubleshooting_674706006.webp)
ETL File 3028821
6
Rev. A 2002
WARNINGS CONT’D
NOTICE
Air wing adjustment screw pairs must be tightened/loosened at the same time to
adjust the angle of the air wing. In other words, one screw of the pair must be
tightened as the other screw is loosened. Air wings can be adjusted singly or
together to modify a side-to-center bake. Be advised that adjusting air wings
affect the entire rack from top to bottom. For this reason, the angle of air wings
should never be changed more then 1 degree at a time. Use the “Air Wing
Adjustment Diagram” in the Appendix section of this manual as a guide when
making adjustments. When desired angle is obtained, check all adjustment
screws – They all must be tight!