25
7. primeTOUCH option
As HID (human interface device) the primeTOUCH is a plug and play capable system. For
advanced features like calibrating the touch coordinates to the image or running a diagnose of the
system you need to install a special software. It is called “Multi Touch Platform” and it is provided
on an USB stick that comes with every GhosT-OLED unit. Besides that the USB stick contains a
detailed manual for the primeTOUCH function and additional documentation. The software and
documentation can also be downloaded from
www.prime-touch.com
.
Note:
It’s necessary to run a calibration process every time you connect the GhosT-OLED-PT
with a new PC or Mac.
8. Content Guide
8.1 Pixel Shift
The GhosT-OLED is running with an integrated pixel shift to avoid image retention. This function
shifts the shown image spirally in intervals of 30 seconds. The maximum offset during shifting
image is about 16 pixels. This leads to the fact that content will partly be shifted out of the active
screen area and not be shown. Also there will be parts of the active screen area that will not show
content. In case of using the T-OLED together with a touch input device, calibration will not remain
precise all the time.
Figure 11: Pixel shift maximum
It is possible to deactivate the pixel shift function in the menu. Please refer to 6.4.2 On-Screen-
Display (OSD) menu guide.
Note:
It its highly recommended to activate the Pixel shift. Deactivating the pixel shift function
can cause permanent burn in effects in the panel. Deactivate only in controlled
environments where the content can’t be switched to static.
16 pixels
16 pixels
