15
PROGRAMMING PURPLE PLUS CONVECTION OVENS
ECOH-PP, ECOF-PP, GCOF-PP,
EHS-PP, ECCO-PP, GCCO-PP
Before You Begin Programming
1. For programming new ovens, you must program at least one button (position 2 through 0) before you can delete
or replace the sample program in position one.
2. If you are programming for the first time after installing a new computer board, or blanking the EPROM, you must
first complete the “CPU Start Up Procedure” that came with the new computer board before programming the
product buttons
3. In preparation of programming you Purple Plus Oven, first determine the cooking parameters you will be using
for each product to be programmed. Use the table on the following page to record your programs prior to
entering them into your unit.
CPU Start Up Procedures
If you are programming for the first time after installing a new computer board, or needed to blank the EPROM, you
will be asked to complete the
“CPU Start Up Procedures”
. You will be asked to identify the oven you are using,
answer NO to questions regarding Steam and Rack Rotation, and 650°F max temperature.
Programming Procedures
PROGRAMMING PROCEDURES
ACTION
DISPLAY
Turn the power switch on. If the oven is already on, press the Read / Clear key until the
following screen is displayed.
SELECT PRODUCT OR
READ/CLEAR TO
PROGRAM
XX:XXPM XXXF
Enter access code “1 6 2 7 3 8”.
ENTER PASSWORD
OR READ/CLEAR
TO DISPLAY PRODUCT
Select “B”.
A: SET DATE / TIME
B: PROGRAM PRODUCTS
C: EDIT ACCESS CODE
Select a number from 0-9 and press the key corresponding to that number.
PRODUCT PROGRAM MODE
NOTE:
If a product Key selected already has a program, the screen will read.
SELECT PRODUCT
NUMBER 0-9
If a product Key dose not have a program, the screen will read.
EDIT PRODUCT?
1=EDIT OR 2=DELETE
NXX TX XXXF CX
XX:XX:XX PXXX F-XX
Enter a desired cooking / baking temperature. The screen will automatically advance to the
next display.
ENTER COOKING TEMP
100 TO 450 F
NOX T1 XXXF
Enter the cooking time and then press “E” to advance to the next screen.
ENTER COOKING TIME
HR:MIN:SEC
NOX T1 XXXF CO
Enter the desired cooking curve. (Refer to sections 6.3 and 6.7 for more detail)
ENTER COOKING CURVE
0 TO 100%
NOX T1 XXXF CXX
XX:XX:XX PXXX F-XX
