![background image](http://html1.mh-extra.com/html/lang/ecoh-2cecn/ecoh-2cecn_assembly-installation-and-operation-instructions_674619011.webp)
11
INITIAL START UP
Pre-Power On
After th oven is installed and connected to power, prior to turning on, verify the following
• The door opens and closes freely
• All racks are in the oven correctly
• All packing materials have been removed from the inside of the oven
Power On
Once the oven has been turned
“ON” verify that the blower
wheel is moving freely in a
clockwise position and that the
elements are heating properly.
Switch the back-up controls on
and make certain it can run the
unit.
Confirm that the thermostat
knob in the back-up controls is
move freely.
Switch the back-up controls
OFF to take it out of back-up
mode.
During the first few hours of operation you may notice a small amount of smoke
coming from the oven, and a faint odor from the smoke.
This is normal for a new unit and will disappear after the first few hours of use.
IL1433
Back-Up Controls
Blower Wheel
NOTICE