![background image](http://html1.mh-extra.com/html/lang/ecoh-2cecn/ecoh-2cecn_assembly-installation-and-operation-instructions_674619010.webp)
10
8
4
1
5
6
8
8
10
11
1
12
5
4
7
7
6
8
8
8
8
9
INSERT BEARINGS (ITEMS "5") INTO THE HINGES
(ITEMS "1" & "2") AS SHOWN THEN REAM WITH A
.508 REAMER.
ECOH HINGE RELPACEMENT KIT
pn: Q9-50313-030
ITEM NO. QTY. PART NO.
DESCRIPTION
50313-031
HINGE PIN WELDMENT
EH-267
EH HINGE COVER
70201-19
70201-01
20109-43
20109-15
eh-198-1
BOTTOM HINGE PLATE ASSY
CR30-148
UPPER HINGE COVER FOR EH
EH-265-1
EH HINGE - TOP - FOR SVC KIT
3
4
5
6
7
8
9
10
11
12
2
2
2
2
2
8
1
1
1
1
EH-266-1
EH HINGE - BOTTOM - FOR SVC KIT
IL1426
Reversing the door
1. Disconnect oven from power.
2. Remove the top and bottom door hinge covers (4) by removing the two 10-32 Phillip head
screws (8).
3. Remove the top door hinge bracket (1) from the oven by removing the two ¼-20 Phillip head
screws (7). The hinge should now slide off of the door pin (this will now be your right hand
lower hinge)
4. Lift the door off the bottom pin and set aside.
5. Remove the bottom door hinge bracket (2) by removing the two ¼-20 Phillip head screws (7)
(this will now be your upper right hand hinge).
6. Remove the lower hinge mounting plate (9) by pulling it from behind the leg pad adapter on the
bottom of the oven.
7. Remove the two Phillips head screws in the bottom right corner of the oven, where the new
hinge will be placed.
8. Slide the hinge mounting plate (9) into place and mount the hinge bracket (this should be your
old upper hinge) using two ¼-20 (7) Phillips head screws.
9. Remove the two Phillips head screws in the upper right corner of the oven where the new hinge
will be placed.
10. Rotate the door 180° and slide the door pin into the bottom hinge bracket.
11. Slide the upper door hinge (1) onto the upper door pin and then screw into place using
two ¼-20 Phillip head screws.
12. Place the top and bottom door hinge covers (4) back on the oven using two 10-32 Phillip head
screws (8).