Lang ECCO-PP, Installation Operation & Maintenance

Page: 14 / 24

Operation cont'd.
15
ENTER PASSWORD
OR READ/CLEAR
TO DISPLAY PRODUCT
A. SET TIME
B. SET DATE
C. PROGRAM
PRODUCTS
D. NEXT MENU
PRODUCT PROGRAM MODE
SELECT PRODUCT
NUMBER 0-9
ENTER COOKING TEMP
100 TO 450F
NOX T1 XXXF
ENTER COOKING TIME
HR:MIN:SEC
NOX T1 XXXF C XX
Programming
Prior to programming new ovens, you must program at least one button (position 2 through 0)
before you can delete or replace the sample program in position one. If you are programming
an oven after replacement of the computer board, or blanking the EPROM, you must first
complete the "CPU" startup procedures that provided with the new computer board. This
must be accomplished prior to programming the product buttons. Identify the oven being
used and answer NO to the questions regarding Steam, Rack Rotation, and 650
O
F maximum
temperature.
In order to prepare the programming of your Purple Plus oven, you must determine the
cooking parameters you will be using for each product to be programmed. The following table
is an example to follow:
Procedure
1. With the oven ON, press the R/C (Read/Clear) button until the
display screen appears.
2.
Enter new password using corresponding product select
buttons. (Default password is 1, 6, 2, 7, 3, 8). The display screen
will appear.
3. Press the "C" button to program products. See programming
manual to set time and date.
4. Press the Select Product button in which you wish to install a
program (0-9).
NOTE
If a program already exists, you will see a screen asking
"Edit Product?" Choose "2" for delete and begin
programming sequence again from Step 3. If you did
select "1" for Edit, the information on line 3 will reflect the
existing program settings from this point forward.
5. Enter the desired cooking/baking temperature and then press the
"E" button to continue.
6. Enter the cooking time.
Tier 1
Product
Name
Cooking
Temp
Cooking
Time
Cooking
Curve
Fan
Speed
Pulse
Rate
Biscuits 325
O
F 12:30 50% HI 100%