Lang ECCO-PP, Installation Operation & Maintenance

Page: 13 / 24

13
OPERATION CONT’D
Typical Operation Sequence
ACTION RESULT
Turn power switch to ON. Control panel comes on, display says
“SELECT PRODUCT OR READ/CLEAR
TO PROGRAM
.
Press a product button. Display says “PRODUCT X PREHEATING
TO XXX F”. Motor starts and oven begins
preheating to the programmed temperature.
Beeper sounds briefly. Display says “READY SELECT PRODUCT
TO START ” .
Open the oven doors and load the product.
Close the door and press the product button
again. Beeper sounds briefly and display says
“SELECT OVEN SHELVES PRODUCT
X”
.
Press the shelf button(s) which correspond to
the shelf positions, which the product is loaded
(A equals the top shelf and E equals the bottom
shelf). Display shows a countdown timer and begins to
count toward zero.
Beeper sounds continuously. Display shows “DONE PRESS SHELF
BUTTON X, REMOVE PRODUCT” , shelf
button(s) flash.
Press the flashing shelf button(s). Beeper stops. Display shows “ READY
SELECT PRODUCT TO START ” if no
other shelves carry product or resume count
down for shelves that still have product
cooking.
Open oven door and remove the product, which
corresponds to flashing shelf button(s).