6
UNPACKING
3.1 Receiving the Range
Upon receipt, check for freight damage, both visible and concealed. Visible
damage should be noted on the freight bill at the time of delivery and signed by the
carrier's agent. Concealed loss or damage means loss or damage, which does not
become apparent until the merchandise has been unpacked. If concealed loss or
damage is discovered upon unpacking, make a written request for inspection by the
carrier's agent within 15 days of delivery. All packing material should be kept for
inspection. Do not return damaged merchandise to Lang Manufacturing Company.
File your claim with the carrier.
3.2 Location
Prior to un-crating, move the range as near its intended location as practical. The
crating will help protect the unit from the physical damage normally associated
with moving it through hallways and doorways.
3.3 Un-crating
Uncrate range as close to installation location as possible. The range is packaged
on a pallet, wrapped in plastic to protect the unit from moisture and surrounded by
a wooden frame. Remove the wood crating carefully. Improper use of tools can
result in damage to the equipment. Remove and discard the plastic wrap.
Desiccant bags on top of the range should also be discarded. Protective paper on
top of the range may be left until the installation is complete.
The range is raised on blocks to enable ease of handling when removing from pallet
with forklift or straps. Use extreme care regardless of method used and be aware of
gravity center, especially with banks of multiple units.
PLEASE NOTE:
Legs, manuals, racks, rack slides, griddle cleaning tools, fryer smother covers and
remote overhead switch boxes, where applicable, are packed inside the oven cavity
and should remain there until the unit is at the final installation location.
Desiccant bags have been placed inside electrical cavity and must be removed
before operation.
CAUTION:
RANGE WEIGHS 600 LBS (272.16 kilograms). FOR
SAFE HANDLING, INSTALLER SHOULD OBTAIN HELP
AS NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.
CAUTION:
ANY STAND, COUNTER OR OTHER DEVICE ON WHICH
RANGE WILL BE LOCATED MUST BE DESIGNED TO
SUPPORT THE WEIGHT OF THE RANGE (600 LBS.).
