background image

19

WARRANTY

Lang Manufacturing Limited Warranty
to Cruise Line Purchasers

Lang Manufacturing Equipment (“Lang
Equipment”) has been skillfully manufactured,
carefully inspected and packaged to meet rigid
standards of excellence.  Lang warrants its
Equipment to be free from defects in material and
material-related workmanship for (13) thirteen
consecutive months from the date of initial
shipboard installation or (18) eighteen consecutive
months from date of initial factory shipment, which
ever comes first.  The aforementioned warranty
statement is subject to the following conditions and
limitations.

I.

 This warranty is limited to the provision of

replacement components for Product sold by Lang to
a joiner company for installation aboard a cruise
ship, or a cruise ship company for installation aboard
its own ship.  The provision of replacement
components to affect Product repairs will be on a no-
charge basis during the term of the warranty.
Replacement components will be sent to the address
required within 48 hours of Lang receiving written
notification of the description of the defect and the
model and serial number of the Product affected by
the repair.

Quartz elements are warranted for ninety (90) days
from the date of installation.

II.

  Damage during shipment is to be reported to the

carrier, is not covered under this warranty, and is the
sole responsibility of purchaser/user. 

III.

 

Replacement components will be shipped

F.O.B. factory with freight prepaid.
Replacement component damage related to
shipment is not covered under this warranty.

IV.

 

This warranty does not cover consumable

parts such as quartz elements, and does not
cover defects caused by improper installation,
abuse, careless operation, or improper
maintenance of Product.

V.

 

All warranties are conditioned upon

Lang’s receipt of written notice of any defect
prior to the end of the applicable warranty
period.

VI.

  

THIS WARRANTY IS EXCLUSIVE AND IS

IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, EACH OF WHICH IS
HEREBY EXPRESSLY DISCLAIMED. THE
REMEDIES DESCRIBED ABOVE ARE
EXCLUSIVE AND IN NO EVENT SHALL LANG
BE LIABLE FOR SPECIAL, CONSEQUENTIAL
OR INCIDENTAL DAMAGES FOR THE
BREACH OR DELAY IN PERFORMANCE OF
THIS WARRANTY.

VII.

 Lang Equipment is for cruise line use only. If

sold as a component of another (OEM)
manufacturer’s equipment, or if used as a consumer
product, such Equipment is sold AS IS and without
any warranty.

Summary of Contents for CLR36-H-U























Reviews: