13
MAINTENANCE & CLEANING continued
CHROME GRIDDLE SURFACE LIMITED WARRANTY EXCLUSIONS
Your Chrome griddle has been designed to give you many years of cooking reliability and requires
minimum maintenance to keep the chrome surface in its original condition. All Chrome griddle surfaces
are warranted for a period of 5 years against manufacturing defects to the original owner from the date of
installation. This limited warranty is void if it is determined by Lang Manufacturing or one of its authorized
representatives that the chrome surface has been misused or abused or subjected to the following
situations:
1. Improperly installed.
2. Incorrect voltage applied to Chrome units allowing the surface to overheat and discolor.
3. The misuse of any instrument or tool which scratches or makes indentations in the surface which
could cause the surface to peel, flake, or chip off.
4. The use of any chemical or abrasive cleaning solution, griddle brick, stone, screen or other cleaning
products which could damage and affect the performance of the chrome surface.
5. The neglect of daily routine maintenance to the chromium surface.
ARNING:
KEEP WATER AND SOLUTIONS OUT OF CONTROLS. NEVER SPRAY
OR HOSE CONTROL CONSOLE, ELECTRICAL CONNECTIONS, ETC.
CAUTION:
MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS
MEMBRANES AND CLOTHING. PRECAUTIONS SHOULD BE TAKEN
TO WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND
PROTECTIVE CLOTHING. CAREFULLY READ THE WARNING AND
FOLLOW THE DIRECTIONS ON THE LABEL OF THE CLEANER TO
BE USED.
NOTICE: Never leave a chlorine sanitizer in contact with stainless steel
surfaces longer than 10 minutes. Longer contact can cause
corrosion.
Calibration
• Set the temperature dials to 350°F (176°C)
• Allow the burners to cycle ON and OFF at least five times before attempting to calibrate
• Place a surface thermometer in the center of each cooking section to be calibrated.
• Allow the burners to cycle several times while recording the temperature at which the burners turn
ON and OFF.
• Average the temperatures together, if the average temperature is within 10° of the set temperature,
the thermostat is within specifications and needs no adjustment.
• If the thermostat is out of specification, remove the thermostat knob and inset a small flat blade
screw driver down the stem of the thermostat and turn the adjusting screw at the base of the stem.
• Turning the screw counter-clockwise raises the griddle temperature while clockwise lowers the
temperature.
CAUTION
WARNING
