background image

 

Unpacking 

Receiving the Griddle 

Upon receipt, check for freight damage, both visible and concealed.  Visible damage should 
be noted on the freight bill at the time of delivery and signed by the carrier's agent.  
Concealed loss or damage means loss or damage which does not become apparent until 
the merchandise has been unpacked.  If concealed loss or damage is discovered upon 
unpacking, make a written request for inspection by the carrier's agent within 15 days of 
delivery.  All packing material should be kept for inspection.  Do not return damaged 
merchandise to Star Manufacturing International. File your claim with the carrier. 

Location 

Prior to un-crating, move the griddle as near its intended location as practical.  The crating 
will help protect the unit from the physical damage normally associated with moving it 
through hallways and doorways. 

Un-crating 

The griddle arrives assembled in a wood frame covered by a cardboard box and strapped to 
a skid. Remove the cardboard cover, cut the straps and remove the wood frame.

 

CAUTION 

THE UNIT IS EXTREMELY HEAVY. FOR SAFE HANDLING, INSTALLER 
SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE 
MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR 
PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO 
THE PLACE OF INSTALLATION. 

 

CAUTION 

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH UNIT WILL BE 
LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE UNIT. 

 

CAUTION 

SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN 
CUT.

 

 

Remove griddle from skid and place in intended location. 

 

Summary of Contents for 124S-M





















Reviews: