Page 28
o
The MIDI THRU option is used to pass along MIDI information received at the MIDI IN
socket to the MIDI out socket
•
PC
(ON / OFF)
o
Enables the PROGRAM CHANGE facility allowing the pedal presets to be switched via
MIDI.
•
CC
(ON / OFF)
o
Allows the pedal to receive MIDI CC (Continuous Controller) messages. Which can be
assigned to control a desired parameter on the pedal. Please see the PRESET SELECT
AND OTHERS chart for the correct control values.
•
DUMP PRESET
o
Allows you to send a DUMP via SYSEX on the current preset to a connected librarian or a
storage device.
PROGRAM CHANGES
You can recall any of the 100 presets on the BCC-TDE with the power of MIDI Program Change (PC)
messages. Most MIDI controllers will be able to send PC messages by standard. See the table below
for more details:
Preset Change
•
PC 000 -> 0xC0 0x00 -> Preset 1
•
PC 000 -> 0xC0 0x01 -> Preset 2
•
…
•
PC 100 -> 0xC0 0x63 -> Preset 100
o
(0x63 Hex is 99 decimal but preset 1 starts at zero so remember 99 will be preset 100)
CONTROLLING PARAMETERS
The BCC-TDE also supports MIDI Continuous Controller (CC) messages for even more real-time
parameter control.
What is a MIDI CC you might ask? MIDI CC is just a bunch of messages that are assigned to various
parameter controls. Have a look at the table below to see what is controllable via MIDI CC messages.
MIDI CC CHARTS
PRESET SELECT AND OTHERS
CC
FUNCTION
CC VALUE
DESCRIPTION
0
PRESET SELECT
0 ~ 100
An alternative to using Program Change Messages.
1
ENABLE
0 ~ 1
0 = Bypass the BCC-TDE
1 = Enable the BCC-TDE
56
FREEZE
0 ~ 1
0 = Disable Freeze
1 = Enable Freeze
10
DELAY MODE
0,1,2
Set the current delay mode
0 = ANALOGUE MODE
1 = DIGITAL MODE
2 = DYNAMIC MODE
SURFACE CONTROLS
CC
FUNCTION
CC VALUE
DESCRIPTION
11
REPEAT
0 ~ 100
12
TONE
0 ~ 100
13
COLOUR
0 ~ 100
14
MIX
0 ~ 100
Summary of Contents for Black Country Customs THE DIFFERENCE ENGINE
Page 1: ......
