Page 22
o
Represents the selected delay time in milliseconds (ms).
DYNAMIC
•
LINK
(ON / OFF)
o
Links both the left and right delay times to provide a stereo repeat. Turning the LINK off
allows you to set different delay times for the left and right delays.
•
TIME
(1 ~ 2500ms)
o
Represents the selected delay time in milliseconds (ms)
MODE SPECIFIC SETTINGS
TAPE
The TAPE menu is visible only when in the ANALOGUE mode. In Vintage Tape Echo Units, the tape
loop would stretch and wear over time, mechanical parts will warp and move slower. These
imperfections are what give those vintage tape echo units their characteristic sound.
We’ve spent a lot
of time and effort into re-creating these sonic characteristics in the BCC-
TDE. We’ve also provided a
n
additional pair of user editable parameters which allow you to dial in your own unique characteristics!
WOW
WOW is a slow form of pitch variation caused predominately by stretches or wear in the tape. The two
parameters for WOW give options for subtle to extreme tape degradation:
•
WOW DEPTH
(0 ~ 100%)
o
Controls the intensity of the WOW effect. At 0 there will be no WOW effect applied to the
delay.
•
WOW RATE:
(0 ~ 100%)
o
Controls the pitch modulation speed of the WOW effect. The speed range is
approximately 0.1Hz ~ 6Hz
FLUTTER
Flutter is faster pitch fluctuations caused by mechanical issues, usually a bent capstan or wear on the
motor. Again, the BCC-TDE gives to option to go from subtle to extreme.
•
FLUTTER DEPTH
(0 ~ 100%)
o
Controls the intensity of the FLUTTER effect. At 0 there will be no FLUTTER effect applied
to the delay.
•
FLUTTER RATE
(0 ~ 100%)
Controls the speed of the pitch flutters. The speed range can approximately be set from 4Hz ~ 100Hz.
MULTIHEAD
The MULTIHEAD menu option is only available in digital mode.
•
MULTIHEAD
(ON / OFF)
o
Engages the additional delay line option.
•
TIME
(1 ~ 2500 ms)
o
Sets the delay time of the additional delay line in milliseconds (ms)
•
LEVEL
(0 ~ 100%)
o
Sets the LEVEL of the additional delay line.
DYNAMICS
The DYNAMICS menu option is only available in Dynamic mode
•
THRESHOLD
(0 ~ -128)
o
Sets the threshold point above which the Dynamic Ducker will begin attenuating the delay
signal. Until the input signal reaches this level the delay signal will not be affected.
Summary of Contents for Black Country Customs THE DIFFERENCE ENGINE
Page 1: ......
