Page 8 /12
Laney
OPERATING INSTRUCTIONS
Your AH200 features a kick style design to enable you to use it as a stage monitor, or a conventional straight combo.
Page 9 /12
OTHER FEATURES
SAMPLE SYSTEM
Laney
OPERATING INSTRUCTIONS
3
4
5
Power inlet socket. Connect to your power source. Make sure the specified voltage is correct for your country!
This drawer contains the main safety fuse for the unit.
USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL.
The mains fuse ratings are detailed in the specs section at the rear of this manual.
The main power switch for the unit.
Serial Number and model of your unit.
This socket(s) should be used to connect an extension-cabinet. One socket is already used to connect to the internal
loudspeaker, you may use the free socket to connect to an external speaker cabinet if you wish. The impedance of the extension
cabinet must not be less than 8 Ohms. Connecting cabinets that have a lower impedance than 8 Ohms will result in the
amplifier overheating. Continual use in this manner may cause permanent damage. Connecting a cabinet with an impedance of
greater than 8 Ohms will cause no damage to the amplifier but will result in a reduced output level. You may disconnect the
internal loudspeaker, in this case the total impedance connected must not be less than 4 Ohms. eg two 8 Ohm cabinets.
1
2
3
FRONT PANEL CONTROLS
4
1
2
5
Summary of Contents for AH200
Page 1: ...USER MANUAL AH200...
Page 3: ...Page 3 12...
