SE AT T LE
56
1
1
1
2
3
10° PASSAGE
1. Insert the flat gasket between the fixed
glass and the aluminium profile (inner
side).
You will find it rolled up in a bag!
2. Install the end stop on the rails above
and below. Use the 8x12 screws provi-
ded, otherwise you risk puncturing the
visible side of the running rail.
11° PASSAGE
1. Install the handle (hole on the inside).
2. Install the cover caps at the top of the
aluminium profiles.
3. Silicon the outside of the shower enclo-
sure around the perimeter as shown in
the picture and wait 24 hours.
8*12
I
2
