Seite A - 45
A
LW SC-180 ES / LW SC-250 ES
Version: 09.12.2022
M A I N T E N A N C E A N D S E R V I C E
Oil change
Oil change as follows:
• Run compressor warm for approx. 2 min.
• Switch off and vent compressor.
• Place a suitable oil drain tray under the oil release valve.
• Screw off oil drain plug carefully and remove oil fill port.
• Drain oil completely.
• Close oil drain valve.
• Fill oil by using a funnel.
• Check oil level. The oil level should be between the middle and upper end of the oil sight glass.
• Screw oil fill port manually in and tighten by hand.
The oil change is now completed.
Maintenance intervals
• First oil change after 25 operating hours (total hours).
• Second oil change at 1000 hours (total hours)
• All further changes after each 1,000 operating hours.
Oil and oil capacity
Approx. 800 ml synthetic compressor oil is necessary for one oil change. Only use synthetic
compressor oil which is recommended as suitable from L&W (L&W Article no.: 000001).
Note
We recommend oil change at least once a year - depending on total operating hours.
i
Summary of Contents for SC-180 ES
