LW 300 E / LW 450 E
Page A - 55
A
M A I N T E N A N C E A N D S E R V I C E
Filter cartridge change
Filter cartridge change as follows:
• Run the compressor up to a pressure of 100 bar.
• Stop compressor.
• Open filling valve.
• Unscrew filter housing cover by using the special filter tool
(Fig. 1).
• Place the T-piece end of the filter tool in the recess of the
filter cartridge (Fig. 2).
• Unscrew the filter cartridge anti-clockwise and pull the
cartridge out of the housing (Fig. 3).
• Open the packing of the new filter cartridge and place it
with the filter tool in the filter housing.
• Screw the new filter cartridge hand tight in by using the
filter tool.
• Screw the cover of the filter housing first manually in.
• After it has been completely screwed in, turn cover antic-
lockwise for 90°. This avoids tightening of the cover due to
vibration..
The filter cartridge change is now completed.
Fig. 1 - Unscrew the filter housing cover.
Fig. 2 - Place the T-piece end of the filter
key in the top of the filter cartridge.
Fig. 3 - Pull the cartridge out of the hou-
sing.
Note
Ensure that the old filter cartridge is disposed cor-
rectly at an approved waste point.
i
Version: 261012-001 E
Summary of Contents for LW 450 E
