025-FIS18_Smart_GATEWAY
12
11
12
ATTENZIONE
In step 4 of the procedure, the default values to be used will be suggested. If these were modified previously and
cannot be recovered, the system must be reset; see paragraph 7.1.
A reset will not delete systems created in the interface (see paragraph 3); it will only reset the network settings
(network name, page address, password).
The default password from "step 4" can be changed by accessing "menu-settings-change password"
3.4
CREATING A GROUP
After creating several devices, a group (comprising several individual devices) can be created to send multiple load
commands with a single action.
This procedure offers the advantage of creating and modifying groups without having to access the central receivers; the
commands will be sent sequentially, i.e. in series. If, for example, the OFF command is sent to a group of three devices,
the three lights will power OFF in sequence.
To command groups simultaneously, perform the device creation procedure (paragraph 3.2a) and associate all the
receivers you wish to be part of the group, rather than a single device (paragraph 3.2b).
PROCEDURE:
STEP2
Click on "menu".
STEP1
Access the application according
to the network configuration
performed in paragraph 2
STEP6
A list of the created groups will
appear (the default list has no
devices).
Click on the "+" button to add a
group
STEP5
Click on "list of groups"
menu
Devices
Configure system
LIST OF DEVICES
LIST OF GROUPS
RESET
STEP3
Click on "Configure system"
Configure system
Devices
Settings
Configure network
Configure system
STEP4*
You will be requested to enter a
password; the default
password is: “1234”.
Confirm
Cancel
Password
Enter password
Saving device
Deviced saved
1234
List of groups
+
List of groups
STEP8
Click on "save" at the bottom of
the page.
STEP9
The application displays the list
of updated devices. If you wish
to add more groups, return to
step 2 of this procedure.
STEP7
The fields to fill in to create the group will appear:
NAME: the name which will appear on the homepage
TYPE OF COMMAND: determines the user command interface and, therefore, the actions which can be perfor-
med.
This field is selected according to the devices which are part of the group: for example, if the group includes a
combination of coloured lights and dimmer lights, and a type of command such as "RGB/RGBW lighting" is
selected, the dimmer lights will remain unchanged if a colour command is transmitted.
Configure system
Save
Name
Select
devices
Type of
command
Icon
TYPE OF COMMAND
On-Off
Open-Stop-Close
Impulse
Dimmer light
RGB/RGBW light
Tunable white light
EXECUTABLE ACTIONS
On - Off
Open - Stop - Close
Impulse
On - Off - Intensity setting
On - Off - Intensity setting - Colour management
On - Off - Intensity setting - Tunable light management