ASSEMBLY
9J893-2307
2-3
Scraper Kit (Notched Gray
Iron Wheel 8C988) - Optional
1. Place the Pulverizer Roller on level ground.
2. Attach short Angles to the Scraper Angle with 1/2-13
x 1-1/2 Bolts, Flat Washers, Lock Washers, and Nuts.
3. Attach Scraper Brackets to the short Angles with
1/2-13 x 1-1/2 Bolts, Flat Washers, Lock Washers,
and Nuts.
4. Center Scraper Angle on Notched Gray Iron Wheel
Roller and attach Scraper Brackets to the Frame
Tube with 1/2-13 x 5-1/2 U-Bolts, Lock Washers, and
Nuts.
5. Center the Scrapers between the Notched Wheels.
Position the Scrapers so that there is a 1/4" gap
between the Scraper and the Notched Wheel.
Secure with 3/8-16 x 1-1/2 Carriage Bolts,
Flat Washers, Lock Washers, and Nuts.
a
Figure 2-4: Scraper Kit Detail
Figure 2-5: Scraper Kit Installation
1/4" Gap
Scraper
Scraper
Angle
Notched
Wheel
Scraper
Bracket
Front
Angle
U-Bolt,1/2-13 x
5-1/2 x 4-9/16
Flat Washer,1/2
Nut,1/2-13
Lock
Washer,1/2
Scraper Angle
Scraper Bracket
Scraper Bracket
Bolt,1/2-13 x 3-1/2
Bolt,1/2-13
x 3-1/2
Angle
Angle
Scraper
Nut,1/2-13
Nut,1/2-13
Lock Washer,1/2
Lock Washer,1/2
Flat Washer,1/2
Flat
Washer,1/2
Bolt,1/2-13 x 3-1/2
Lock
Washer,1/2
Nut,1/2-13
Bolt,1/2-13
x 3-1/2
Scraper
Angle
Carriage Bolt,
3/8-16 x 1-1/2
Nut,3/8-16
Lock Washer,3/8
Flat
Washer,3/8
Summary of Contents for PP-5
Page 4: ......
Page 16: ...2 6 9J893 2307 ASSEMBLY TABLE OF CONTENTS INDEX Table provided for general use NOTES ...
Page 22: ...3 6 9J893 2307 OPERATION TABLE OF CONTENTS INDEX Table provided for general use NOTES ...
Page 59: ...INDEX 8 3 TABLE OF CONTENTS INDEX Table provided for general use NOTES ...