4-8
F-1108-0121
Roller Axle Assembly
After an initial run of 5-10 hours, check the Roller Axle
Assemblies to ensure that the wheels are tight to one
another. If not, starting at the welded stop end, slide the
wheels tight together and adjust the Axle Clamps so that
it’s against the wheel.
between the Axle Clamp and the Wheel Stop, install the
appropriate clamp spacers.
Clamp Tightening
Tighten the Clamp bolts evenly to achieve equal spacing
between clamp section. Torque to 75 ft-lbs. Thereafter
check assemblies every 50-100 hours.
Figure 4-5: Roller Axle Assembly
Figure 4-6: Clamp Tightening
Flange Bolt,
1/2-13 x 2-1/2
Flange
Locknut,1/2-13
Wheel Stop
Axle Clamp
Wheel
Torque to 75 Ft/Lbs
Flange Bolt,
1/2-13 x 2-1/2
Flange
Locknut,1/2-13
Axle Clamp
Wheel
Summary of Contents for Brillion WFPC23
