Landoll BRILLION TURFMAKER II SL, Operator'S Manual

Page: 87 / 100

MAINTENANCE
9K998 4-7
Transmission 01/2020 and Prior
On the back of the Transmission by the Calibration
Wrenches, loosen the Transmission #40 Drive Chain
Idler Sprocket Axle Bolt to adjust the Drive Chain
Tension. Tighten or loosen the Clevis Drawbolt Locknut
to obtain about 1/8” - 1/4” Slack. Re-tighten the Idler
Sprocket Axle Bolt. Be careful not to over-tighten this
Chain.
Figure 4-5.
#550 Drive Chain between the Front Roller Sprocket and
Transmission Clutch Shaft should have approximately 2”
of total deflection. Loosen the Nylatron Tension Idler and
adjust accordingly.
Figure 4-5: Transmission 01/2020 and Prior
7RWDO
'HÀHFWLRQ
6ODFN
&OHYLV
'UDZEROW
&OHYLV'UDZEROW
/RFNQXW
,GOHU6SURFNHW
$[OH%ROW
1\ODWURQ
7HQVLRQ,GOHU
)URQW5ROOHU
6SURFNHW
5HDU6HHG6KDIW
)URQW6HHG6KDIW
&OXWFK6KDIW
6/2S2OG7UDQ\7HQVLRQ
&KDLQ
&KDLQ