2-8
9J017
ASSEMBLY
Drawbar Hitch Installation
1.
Mount the flat spring to the bottom of the drawbar
with 3/8-16 x 1” long Screws, 3/8” Lockwashers and
3/8” Nuts.
2.
Mount the clevis to the drawbar with a 1” x 8 1/4” Pin
and (2) 1/4” x 1 1/2” Cotter Pins. The flat spring
support aids in the attaching of the pulverizer to a
tractor or implement. See Figure 2-9.
3.
Attach the jack to the round tube near the hitch with
the pin and chain.
4.
Using a 5/8-11 x 2” Screw and 5/8” Lockwasher and
a 1” Flat Washer, bolt the hose support through the
drawbar and secure with a 5/8” Flat Washer and 5/8”
Nut.
Figure 2-9: Drawbar Hitch Installation
DRAWBAR
DRAWBAR
HITCH
FLAT
SPRING
JACK
HOSE
SUPPORT
SCREW, 5/8-11 x 2”
LOCKWASHER, 5/8”
FLAT WASHER, 1”
FLAT WASHER, 5/8”
NUT, 5/8”
PIN
COTTER PIN, 1/4”x 1 1/2”
SCREW, 3/8”
NUT, 3/8”
LOCKWASHER, 3/8”
