Landoll 9630FH, Operator'S Manual

Page: 50 / 108

3-6 F-1105-1120
ASSEMBLY INSTRUCTIONS
Gauge Wheel Assembly Center
IMPORTANT
Read all safety precautions at the front of the section
before attempting any of the following procedures.

WARNING
1. Remove the shipping u-bolts and nuts from front of
the gauge wheel extension mounts
See Figure 3-3 .
2. Attach the gauge wheel assemblies to the front of the
center frame with 3/4 x 5-1/2 bolts and 5/8 lock nuts.
3. Connect the radius rod assembly to the front of the
gauge wheel lift tube with the installed 1 x 7-1/2 bolts
and 1 lock nut. Connect the front of the radius rod
assembly to the top of the gauge wheel links with 1 x
7-1/2 bolt and 1 locknut. Initially set the radius rod
assembly to 21” centers.
4. Install 6-bolt tire/wheel assemblies on the gauge
wheel assemblies.
Do not attempt to lift heavy parts (such as the
pull hitch) manually. Use a hoist or a fork lift to
move these parts into position.