Landoll 855 FINISHOLL Series, Supplement Operators Manual

Page: 5 / 10

1-1
Chapter 1
Operating Instructions
Figure 1-1: Ramp Terminology
Front 6-1/2’ Ramp Assembly
1. Remove gooseneck from trailer per instructions in
operator’s manual.
2. Unhook safety latches holding ramps to trailer frame
(See Figure 1-1.)
3. Remove wired remote from frame slot on driver’s side
of trailer.
4. Make sure area where ramps are to land are free
from all obstacles and personnel.

CAUTION
5. Operate remote by pushing switch to “DOWN”
position.
6. To raise the ramps push switch to “UP” position.
7. Engage locks to secure ramps.
8. Return remote to storage location.
WIRED REMOTE
CONTROL
LOCATION
RAMP LATCH (IN
UNLOCKED POSITION)
6 DEGREE
RAMP WELDMENT
RAMP LATCH (IN
LOCKED
POSITION)
ramp terms
Before folding or unfolding ramp(s), confirm that
harness and air hoses used to connect to gooseneck
do not interfere with cylinder movement.