![background image](http://html1.mh-extra.com/html/landmann/avalon-pts-5-1-plus/avalon-pts-5-1-plus_assembly-and-operating-manual_673786013.webp)
13
avalon PTS 5.1+
Manual temperature setting
Holds down the "Mode" key for five seconds to set
the desired cooking temperature manually. Adjust the
desired temperature using the "MIN" and "SEC" but-
tons. Confirmed temperature you set by pressing the
"MODE" key. The selected temperature appears on the
display. An audible signal occurs when the selected tem-
perature has been reached.
Toggling °C/°F
Remove the battery compartment cover on the rear of
the thermometer and set the switch to either °C or °F to
change between °C and °F.
Display backlighting
Press the "LIGHT" key or any other key to activate the
display backlighting.
Countdown/Stopwatch function
To enable the countdown function, and use the "MIN"
and "SEC" keys to set the desired time and confirmed
this by pressing the "START/STOP" key. Press "START/
STOP" to start the stopwatch function. To stop the
watch, press this key again. The "CLEAR" key lets you
reset the watch.
Note: The greatest possible time display is 99:59.
Using rotisserie
Caution:
• Never use the rotisserie burner in combinati-
on with the standard burners or the infrared
bottom burner because the excessive heat this
causes will damage the barbecue.
• Before you use the rotisserie burner, always
remove the warming rack (1) to avoid the heat
from the rotisserie burner damaging it.
• If you intend to grill larger quantities of food
on the rotisserie, it may be necessary to remo-
ve the grills (3) and the hot plate (2).
• Do not overload the rotisserie with too much
meat (max. 3 kg). This can cause damage to
the rotisserie, the rotisserie mount and the
electric motor.
• Before you insert or remove the rotisserie,
extinguish the flames on all burners (turn all
flame regulators to "Off") and turn off the
rotisserie motor. Otherwise you may burn or
injure yourself on the rotating, sharp-edged
skewer.
1. Open the barbecue lid (8).
2. Make sure that the 3 flame regulators for the
standard burners (B) and the flame regulator for
the infrared burner (C) are in "Off" position.
3. Place the electric motor for the rotisserie (6) on
the mount (7) and push it back to the mechanical
stop.
6
A
7
Mounting the rotisserie electric motor
4. Push one of the meat clamps onto the skewer
(spikes point inwards towards the meat), then
the meat (as near to the centre as possible) and
then the other meat clamp (spikes point inwards
towards the meat).
5. Align everything to the centre, push the meat
clamps into the meat and tighten the screws of
the meat clamps.
6. Insert the square end of the skewer into the
mount on the electric motor for the rotisserie (6)
and place the round end of the skewer on the sup-
port on the right side of the barbecue.
7.
Mounting the rotisserie
8. Observing the safety instructions on page 10 plug
the power cable on the electric motor for the
rotisserie into a 230-V socket.
9. Set the switch (F) on the electric motor for the
5
A
6
F
Summary of Contents for avalon PTS 5.1 Plus
