Landmann Ardor PTS+5.0+Built-In, Assembly And Operating Manual

Page: 22 / 28

22 Ardor
Cutout Dimensions for Built-in Grills
Model
Cutout Dimension (cm)
D E F
12113 74,5 56 25,5
Caution: Required additional grill & side bur-
ner details
Caution: Always have all Grill and Accessories
on hand when constructing and island to make sure of
proper fit.
12113
Overhead Protection & Exhaust Removal
Do not install this appliance under any unprotected over-
head combustible construction. If installed under any com-
bustible construction the cooking area over the grill must
be covered with an exhaust hood.
The hood must provide 8 cm to 15 cm of overhang on all
exposed sides. The exhaust hood shall provide no less than
1200 CFM for proper exhaust ventilation.
Rear hood clearance
A minimum of 14,6 cm clearance is required from the back
of the grill (19 cm from the back of the grill cut out) to allow
the lid to open.
The grill exhausts combustion by products and cooking gre-
ases to the back. Never locate the grill where this exhaust
residue will be difficult to clean.
14,6 cm
Add 19 cm to allow
for hood opening
Notch depth equals
countertop overhang
1,5 cm Grills & side burner
CountertopNotch Detail
Allow minimum of 14,6 cm
clearance from the grill‘s
rear edge (19 cm from
cutout ) to the backsplash
to allow hood to fully open.
Dim “E” fr
om above
D
F
E