Landmann 43106, Assembly, Care And Use Instructions

Page: 21 / 24

2 1
Troubleshooting
Problem Cause Solution
Appliance
will not light.
1. LP cylinder valve is closed.
2. LP cylinder gas level is low.
3 . “Match lighting” may be
necessar
loose.
y.
4 . Connections to the igniter are
5 . Electrodes may be wet.
6 . Debris is blocking the electrodes.
7 . No spark shows at igniter tip.
1. Turn ON LP cylinder valve.
2. Replace LP cylinder.
3 . “Match lighting” light grill per this
manual’s instructions.
4 . Reconnect or replace wiring to
igniter.
5 . Dry electrodes with dry cloth.
6 . Clean electrodes with rubbing
alcohol and retry.
7 . Replace igniter.
Flame will not stay lit. 1. Gas valve is closed.
2. Gas gas level is low.
3. Burner is not properly installed or
dirty.
1. Turn ON Gas valve.
2. Replace LP cylinder.
3. Reinstall burner properly and clean
out any debris.
Flame is low, irregular
or noisy. 1. LP cylinder gas level is low.
2 . Burner ports may be clogged.
3 . Gas supply may be bent or kinked.
4 . Appliance may be in an area that
is too windy.
5 . There are obstructions such as grease
debris, or insects in air inlets.
1. Replace LP cylinder.
2 . If only one burner is affected, check
and clean the burner ports.
3 . Straighten out the gas supply hose.
4 . Wait until wind subsides to continue.
5 . Clean burner air inlets of obstructions.