10
.
1. For each leg, line up the holes and insert the bolts. Nuts are
pre-welded to the cabinet. The back legs bolts should be inserted
and securely tightened. For the front leg bolts, insert and adjust
1 bolts per leg (as shown) 1/2 way.
IMPORTANT: There are two legs that contains an extra hole must
be mounted in the front position as shown. This hole will be used
to secure the control panel to the legs with bolts.
2. DO NOT yet insert the two (2) bolts in the locations indicated.
These two bolts will be used in the next assembly step.
M6x15 bolt
8 required
Cabinet
Assembly
Hardware Bag
A
Phillips Head
Screwdriver
Assembly Step 3
4 Legs
Summary of Contents for 3875GWLACR
Page 29: ...29...
