Operator Manual - GRIND PRO DUAL
Landis International - 3
RISK OF INJURY
•
DISCONNECT TOOLS BEFORE SERVICING AND LOCK THE SWITCHES.
•
EYE PROTECTION SHOULD ALWAYS BE WORN BY THE OPERATOR AND OTHERS IN THE
WORK AREA WHEN THE SANDER IS IN USE.
•
EYE PROTECTION IS REQUIRED FOR PROTECTION FROM FLYING DEBRIS AND DUST, WHICH
COULD CAUSE EYE INJURY.
INSTALLATION
The Landis Sander should be located on a flat, firm surface, in an area free
of obstructions that could interfere with the safe operation of the
equipment. The Sander should be positioned and leveled with the 4 white
plastic legs to obtain quiet operation with a minimum of vibration.
•
ALL ELECTRICAL WORK MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN AND MUST
CONFORM TO ALL STATE AND LOCAL ORDINANCES.
•
DO NOT, UNDER ANY CIRCUMSTANCE, TAMPER WITH, MODIFY, OR ADAPT THE
ELECTRICAL PLUG AND CORD PROVIDED WITH THIS MACHINE.
ELECTRICAL CONNECTIONS
Electrical connection may be made by
either plugging the provided electrical
cord into an appropriately wired
electrical socket, or by wiring the
machine directly into an electrical
disconnect box. The customer must
ensure that the voltage is 230 V.
•
IF THE ELECTRICAL CORD, PLUG OR WIRING SHOULD BECOME FRAYED OR DAMAGED,
REPLACE IT AT ONCE. DO NOT ATTEMPT TO OPERATE THE MACHINE WITH FAULTY WIRING
AS IT COULD RESULT IN SEVERE INJURY OR DEATH.
NOTE: REFER TO THE MACHINERY IDENTIFICATION PLATE TO DETERMINE THE ELECTRICAL
SPECIFICATIONS OF THIS MACHINE IN RESPECT TO VOLTAGE, PHASE AND AMPERAGE
REQUIREMENTS.
