Installation
27/54
D000029326 en g – E450 PLC 1-phase ZCX100Px – User Manual
© Gyr
4.6
Installation Support for Communication Devices
Remote and local communication devices can be installed using the display
user interface. A general description of the display user interface is given in
section 5.1 "Display"
.
4.6.1
Entering the Service Menu
The service menu can be entered as follows:
1.
Briefly press the display key. The display check appears on the
display.
2.
Briefly press the reset key. The first item of the service menu
Ser_dAtA
appears on the display.
3.
Once
Ser_dAtA
is displayed, the other menu items can all be obtained
by briefly pressing the display key. Press the display key until the
menu item
InStALL
is displayed and then press the display key for > 2
seconds.
Display Check
R
T
T
T
Press display key briefly (t < 2 s)
Press display key longer (t >= 2 s)
Press display key twice briefly (double click)
Press reset key briefly (t < 2 s)
Display menu
Service menu
Operating display
Timeout
T
Press reset key longer (t >= 2 s)
R
R
R
Fig. 4.6 Entering the service menu
Fig. 4.7
shows the submenus which can be accessed from the installation
menu. Navigation within the installation menu follows the same guidelines
as for the display menu: One short key press to go to the next submenu or
a long key press to enter the submenu.
