Filename: User Guide Sabre Mk5 Rev 0.0.doc
Page 22 of 28
Information Register Functions
Info Register
Number
Function / Meter Parameter
034
Changeable Option Register – Upper (Not used)
035
Changeable Option Register – Lower
036
Volatile Meter State Register – Upper
037
Volatile Meter State Register – Lower
048
Software Version Number
050
Power-fail Counter
054
Last Credit Token 20-Digit Transfer Number and ID in date/time format
055
Last Credit Token ID
056
Value of Credit for Last Credit Token entered
057
Key Revision and Key Type
058
Tariff Index
059
Current Credit Register (10 Wh resolution)
060
Supply Group Code Register
061
Total Units Counter (10 Wh resolution)
301
Last Token’s 20-Digit Transfer Number and ID in Date/Time Format
302
2
nd
Last Token’s 20-Digit Transfer Number and ID in Date/Time Format
…
…
350
50
th
Last Token’s 20-Digit Transfer Number and ID in Date/Time Format
600
Enter Customer Information Mode (Refer to section 6.28)
6.1. Meter Number (Register 000)
The meter displays the unique identity number personalised at the time of manufacture. The
serial number scrolls on the display from right to left. It must match the number printed on
the meter’s front panel label.
6.2. Instantaneous Power (Register 001)
The meter displays the power currently being consumed by the connected load.
6.3. Current Credit Register (Register 002)
This register stores the remaining credit in the meter. This register has a minimum value of
-99 999.99 kWh, and a maximum value of 9 999 999.99 kWh.
Note: When more than seven digits are to be displayed (e.g. 1234567.8), the decimal digits
are dropped.
Note: The remaining credit can be decremented past zero (0) into negative values if the
load is not disconnected. This negative credit value will be subtracted from any new credit
entered into the meter.
