Information Functions Released
33/38
Cashpower Gemini PLC
– User Guide
© Gyr (Pty) Ltd
11.11 Power Limit Level (Register 014)
The meter displays the power level (in either Amps or Watts) at which the
load switch
will be opened,
causing the supply to the customer to be interrupted.
11.12 Extended Meter Number (Register 024)
The „extended meter number‟ displays the „missing‟ three digits of an (STS only) meter number in the
format „07- - - - - n‟ where:
07 is the manufacturer code (07 for S. African manufactured Gyr meters).
n represents the check digit.
11.13 Meter (Fixed) State Register 0 (Register 031)
The meter displays the state in which the meter currently is. Note that these values are stored in the
meter‟s EEPROM and will be maintained even if the meter is powered down:
Meter (Fixed) State Register 1
Display
Function
(bracketed values apply for bit set to
1
)
1
XXX XXXX
Load switch inhibit (power limit lockout mode
– 30 minutes)
X
1
XX XXXX
Significant reverse energy metered
XX
1
X XXXX
Credit-metering enabled
XXX
1
XXXX
Meter decommissioned
XXXX
1
XXX
Meter NOT initialised (default key)
XXXX X
1
XX
Meter in power limit trip (30-seconds)
XXXX XX
1
X
Meter out of credit
XXXX XXX
1
Meter tampered
11.14 Meter (Fixed) Option Register 0 (Register 033)
The meter displays functions personalised into the meter at the time of manufacture. They cannot be
subsequently changed via a voucher:
Meter (Fixed) Option Register 0
Display
Function
(bracketed values apply for bit set to
1
)
1
XXX XXXX
Not used
X
1
XX XXXX
Not used
XX
1
X XXXX
Not used
XXX
1
XXXX
Do not open (open) the meter load switch when commissioning a
customer interface unit
XXXX
1
XXX
Not used
XXXX X
1
XX
Disable (enable) creep detection
XXXX XX
1
X
Don‟t display (do display) negative credit
XXXX XXX
1
(Enable) STS
